View Full Version : Fitting a multi-fuel stove
farrnorth1
02-Sep-13, 22:09
I'm going to fit a multi-fuel stove in my kitchen, with a flue exiting through the flat/sloping roof above!
Does anyone have any advice on whether I need a building warrant or not and if it needs to be fitted
by a professional - I can do the work myself! Also will I need an architect to draw plans?
Any advice thank you!
caithness-chicky
02-Sep-13, 22:45
Hi Farrnorth1, I'm also looking at installing a multi-fuel stove and was told that unless its a listed building you don't need a building warrant or planning permission. It doesn't need to be fitted by a proffessional but it does need to be installed to the building standards/regs
Hope this helps
CC
farrnorth1
03-Sep-13, 09:02
Thanks CC - is you,s going through an existing chimney or a new flue pipe through the roof? I'm planning a pipe through the roof and suspect it might need a building warrant - there's so much to think about!
MM
farrnorth1
15-Sep-13, 14:32
Can anyone recommend someone who would draw up a plan for building warrant purposes?
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.