Caithness Map :: Links to Site Map Paying too much for broadband? Move to PlusNet broadband and save£££s. Free setup now available - terms apply. PlusNet broadband.  
Results 1 to 10 of 10

Thread: EEPROM Programmer?

  1. #1

    Default EEPROM Programmer?

    Has anyone local got one of these, along with the software that can extract the dump code from a car stereo to obtain the security code? Been told that with my particular unit, the serial number alone is not enough to get the code, the dump code is required as well. The stereo in question is a Siemens VDO CDR 500 CD.

    Thanks,

    Kcb.

  2. #2
    Join Date
    Dec 2008
    Location
    wick
    Posts
    1,202

    Default

    http://forums.moneysavingexpert.com/...26827&page=759

    also if you look on yahoo groups
    there are several forums there that will do it for free

    I have a wilem board and used to do it years ago.

    still got the board and the software
    but noy used it in years.

    dx
    Private Electronic Workshop in Wick - send us a PM
    **WE NOW DO REPAIRS AND CRACKED SCREENS ON MANY PHONES & TABLETS**
    PC virus/ransomware/data recovery/repair & service
    also Private marine & CB/Amateur radio repairs

  3. #3

    Default

    Quote Originally Posted by dx100uk View Post
    http://forums.moneysavingexpert.com/...26827&page=759

    also if you look on yahoo groups
    there are several forums there that will do it for free

    I have a wilem board and used to do it years ago.

    still got the board and the software
    but noy used it in years.

    dx
    Hi there.

    Yeah, been on the above forum. They told someone else with the same radio to get the dump code, as the serial number is no use for this model. That's why I need somebody who has the device and relevant software to get the dump code for me. I can then go back to that forum and enter it and they will give me the code for free? I think the person that can get the dump code might be able to give me the code though, and won't need to go back to that forum for it?

    Would your wilem board still be capable of doing it do you think?

    Cheers,

    Kcb.

  4. #4
    Join Date
    Dec 2008
    Location
    wick
    Posts
    1,202

    Default

    digging out old notes

    been many many years

    how many digits is the radio code?
    Private Electronic Workshop in Wick - send us a PM
    **WE NOW DO REPAIRS AND CRACKED SCREENS ON MANY PHONES & TABLETS**
    PC virus/ransomware/data recovery/repair & service
    also Private marine & CB/Amateur radio repairs

  5. #5

    Default

    Quote Originally Posted by dx100uk View Post
    digging out old notes

    been many many years

    how many digits is the radio code?
    Hi.

    I think it's a four digit code? From what I've gathered from other sites I've been on, it's 6 digits in total, but they all start with 10 _ _ _ _ so it would appear to be the last 4 digits that's required?

    The serial number has 14 digits if that helps any?

    Thanks for your help,

    Kcb.

  6. #6
    Join Date
    Dec 2008
    Location
    wick
    Posts
    1,202

    Default

    not sure

    I know I've circled 139554
    and
    001801

    as defaults in the cd600 notes from the 90's when I did them.

    I also have 289 or 284 as defaults.

    have to find my wilem board but I've still got it.

    you can borrow it when I find it, as long as you can pop the eeprom out
    you can read it

    wont be quick mind I've not seen it in about 2yrs.
    Private Electronic Workshop in Wick - send us a PM
    **WE NOW DO REPAIRS AND CRACKED SCREENS ON MANY PHONES & TABLETS**
    PC virus/ransomware/data recovery/repair & service
    also Private marine & CB/Amateur radio repairs

  7. #7

    Default

    Quote Originally Posted by dx100uk View Post
    not sure

    I know I've circled 139554
    and
    001801

    as defaults in the cd600 notes from the 90's when I did them.

    I also have 289 or 284 as defaults.

    have to find my wilem board but I've still got it.

    you can borrow it when I find it, as long as you can pop the eeprom out
    you can read it

    wont be quick mind I've not seen it in about 2yrs.
    Maybe it's different for this model with it being a CD500? It's supposed to fit a Vauxhall from 2001-2006?

    I've never taken this style apart before, but I'm sure I would manage it? It's not in the car at present anyway, so if you find your wilem board you could maybe give me an idea if I bring it with me?

    Cheers,

    Kcb.

  8. #8
    Join Date
    Dec 2008
    Location
    wick
    Posts
    1,202

    Default

    poss, not too well at present.

    if I get a chance i'll be looking for it later in the week.

    dx
    Private Electronic Workshop in Wick - send us a PM
    **WE NOW DO REPAIRS AND CRACKED SCREENS ON MANY PHONES & TABLETS**
    PC virus/ransomware/data recovery/repair & service
    also Private marine & CB/Amateur radio repairs

  9. #9

    Default

    Quote Originally Posted by dx100uk View Post
    poss, not too well at present.

    if I get a chance i'll be looking for it later in the week.

    dx
    Hi again.

    That's great, just let me know? I appreciate your help and info.

    Hope you're feeling a bit better too!!

    Cheers,

    Kcb.

  10. #10
    Join Date
    Dec 2008
    Location
    wick
    Posts
    1,202

    Default

    Right I have the board now

    And I have an old cd 500 radio too.

    Mike

    Private Electronic Workshop in Wick - send us a PM
    **WE NOW DO REPAIRS AND CRACKED SCREENS ON MANY PHONES & TABLETS**
    PC virus/ransomware/data recovery/repair & service
    also Private marine & CB/Amateur radio repairs

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •